Stump Grinding Equipment
VERMEER STUMP GRINDER
 Image for reference only | |
Daily: $275.00
Weekly: $687.50
Monthly: $1,925.00
- Info
- GENERAL DIMENSIONS AND WEIGHTS
- Length
- 94 in
- Width
- 35 in
- Height
- 49 in
- Weight - Engine Option One
- 1550 lbs
- ENGINE - OPTION ONE
- Make and Model
- Kohler ECH740
- Number of Cylinders
- 2
- Gross Horsepower (Maximum)
- 25 hp
- Torque (Max)
- 42 ft-lb
- Fuel Tank Capacity
- 6.8 gal
- Max Fuel Consumption
- 2.4 gph
- Fuel Type
- Gas
- Air Cleaner
- 6 " (15.2 cm) 2-Stage dry
- Oil Filter
- Spin-on
- Recommended Oil
- Kohler oil or API CH4/SJ
- Oil Volume with Filter
- 2 qt
- Maximum Angle of Continuous Operation
- 25 deg
- Cooling Medium
- Air/oil
- CUTTERWHEEL SYSTEM
- Cutterwheel Diameter without Teeth
- 16 in
- Cutterwheel Thickness
- .5 in
- Cutterwheel Speed
- 1110 rpm
- Cutterwheel Straight Line Dimension
- 35.5 in
- Cutterwheel Cut Above Ground
- 25 in
- Cutterwheel Cut Below Ground
- 12 in
- Tooth Description
- Yellow Jacket Cutter System
- Number of Teeth
- 16
- Number of Indexes
- 2
- Number of Pockets
- 16
- Reversible Pockets/Teeth
- Yes
- Cutterwheel Guard
- Yes
- Chip Containment
- 2.2 cu ft
- CUTTERWHEEL DRIVE COMPONENTS
- Lower Gearbox
- Hydraulic motor
- HYDRAULIC SYSTEM
- Tank capacity
- 9 gal
- Recommended Oil Type
- ISO 68
- System Type
- Open loop
- Filtration Method
- Inline return filter
- Pump Flow at Maximum RPM
- 16 gpm
- System relief pressure
- 2750 psi
- Flow Control
- Autosweep (option)
- Directional Control
- Standard
- Oil Cooler
- Yes. Fan-cooled
- ELECTRICAL SYSTEM
- System Voltage
- 12
- Battery
- 405
- Standard Gauges
- Hour meter/tach
- Switches
- Cutter wheel drive
- Controller
- Yes
- CHASSIS
- Control Station Description
- Fixed-rear
- TRACK DRIVE SYSTEM
- Track Type
- Rubber 7 " (17.8 cm) width
- Track Width - Retracted
- 35 " (88.9 cm)
- Track Width - Extended
- 35 " (88.9 cm)
- Track Length on Ground
- 31.4 " (79.7 cm)
- Type of Idler
- Cast
- Number of Idlers
- 5
- Track Drive Pump Type
- Hydrostatic
- System Relief Pressure
- 2900 psi (200 bar)
- Pump Flow at Maximum RPM
- 11.4 gpm (43.1 L/min)
- Track Drive Motor Type
- Geroter
- Track Brake Type
- Hydrostatic
- High Speed Travel
- 3.2 mph
- Ground Bearing Pressure - Soft Ground
- 3.4 psi
* Prices are subject to change. Delivery and other applicable fees are not included in this price estimate.
Please call us for any questions on our vermeer stump grinder rentals in Adairsville GA, serving Dalton, Rome, Marietta, Calhoun, Cartersville, Acworth, and Kennesaw in NW GA
